Samsung has stopped official software updates for Galaxy Tab 10.1. But you can still install latest operating system on it. Yes you can now update Samsung Galaxy Tab 10.1 to Android 5.1 Lollipop operating system.

• Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 Battery Replacement
• Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 7 0
• Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 Battery Won T Charge
• Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 Lite
• Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 320

The firmware is developed based on Android open source project. As it isn’t official firmware developed by Samsung, do not install this firmware for daily use. If you are still ready to try and update Samsung Galaxy Tab 10.1 to Android 5.1 Lollipop, do follow this XDA thread to get solutions for minor solutions. Further, follow the below prerequisites to safeguard your personal data and to ensure successful installation.

If you have a Sprint Samsung Galaxy Note 2 (SPH-L900) then don’t be a fool like me and try to install the GApps 5.1! They didn’t link the right one above to download, but remember you are getting Lollipop 5.0.1 with this ROM not 5.1. Get the CORRECT GApps=GApps Minimal Edition 2015-04-04 for Android 5.0.x (90 MB). This is the official Android 4.3 Jellybean, 4.4.2 Kitkat, and 5.0 Lollipop stock firmware/ROM(Flash file) for the Samsung Galaxy Note 3 LTE SM-N9005. The flash file for the Samsung Galaxy Note 3 LTE SM-N9005 is necessary when you want to perform any of the following software-related tasks: Upgrade/Update your Samsung Galaxy phone’s firmware. Reinstall the Continue Reading. The Samsung Galaxy Tab 3 has just gotten itself an Android 6.0 Marshmallow ROM that partly works for now, but is promising, and the developer nels83 should soon be able to sort out the remaining bugs/issues. For the unknowledged, the Galaxy Tab 3 is a 2013 device so it is past its promised software upgrade period.

PREREQUISITES

Check Device Model Number

It is vital to check device model number before rooting/unlocking/flashing process to ensure flashing compatible files on the device. The device model name should be Samsung Galaxy Tab 10.1 Wi-Fi(GT-P7510). If your device model number doesn’t match with mentioned one, do not attempt the tutorial.

Samsung Galaxy Tab USB Drivers

To transfer firmware packages, it is to be connected with PC. For the PC to detect the device, it should have installed Samsung USB drivers. If you’ve not installed previously, download them form below source and install manually.

Steps To Be Considered

• Enable USB debugging on the Samsung Galaxy Tabwhich lets the device establish a stable connection with computer via USB. You can do it by following the below mentioned path. In latest versions of Android, the Enable Debugging option will be hidden in depth of settings panel. You can follow our guide to enable USB debugging.
• Rooting the device erase entire data on the device including internal SD card. So, make sure you create a backup of entire important data. If you are not familiar with Android backup process, you can refer our guide to Backup Android phone data.
• Make sure the phone’s battery is at least 60% charged at the start up of tutorial. If battery runs off during unlocking process, it may turn your phone into brick. So, charge the device before tutorial.
• If the device bootloader is locked, it is to be unlocked before rooting process. You cannot gain root access unless bootloader is unlocked.
• To install custom ROM’s/Firmware the Galaxy Tab must be rooted and should be installed with Clockworkmod recovery/TWRP recovery. Perform this step if not done previously.

Are you sure you completed all the above steps? Yes, you can now get started with the Lollipop installation process.

DOWNLOADS SECTION

Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 Battery Replacement

GUIDE TO UPDATE SAMSUNG GALAXY TAB 10.1 TO ANDROID 5.1 LOLLIPOP

Disclaimer: Rooting/Unlocking/Installing custom ROMs and Kernels are not official methods. So, neither device manufacturer nor Droid Word team is responsible if anything goes wrong with your device during the process. This article is only for educational purpose. You can continue with the implementation at your own risk.

STEPS TO BE FOLLOWED

Step 1: Download Android Lollipop ROM and Google Apps packages from downloads section to your PC. Do not unzip the packages.

Step 2: Connect Galaxy Tab to PC using an USB cable.

Step 3: Transfer the downloaded packages into the root of phone/SDcard memory.

Step 4: Once the transfer is done, disconnect the USB and turn off the Galaxy Tab.

Step 5: Enter custom recovery mode on Galaxy Tab. Don’t know how? Do follow the simple step below.

Turn on the device by holding Volume up+Home+Power buttons together until you see the recovery mode.

Step 6: In custom recovery mode, you can view a list of options which are not available in Stock recovery. Among them, find and select wipe data/factory reset(In recovery mode the touch interface will not work. You can use Volume buttons to navigate and Power button to select).

Step 7: Now perform a complete data wipe by selecting wipe cache partition.

Step 8: Once done, enter advanced options in recovery mode and select wipe dalvik cache.

Step 9: If you are done with all the above steps, you can flash the firmware package now. Select install zip from sdcard, navigate and choose the previously copied Android Lollipop ROM package. Confirm the installation and do not interrupt the process.

Step 10: After completion follow Step 9 again and choose Google apps package in this case.

Step 11: Once the packages installation is completed, select reboot system now option.

That’s it! Your device now boots up running Android 5.1 Lollipop. You have successfully Updated Samsung Galaxy Tab 10.1 with Android 5.1 Lollipop via AOSP firmware. If you face any issues while following the above guide, do let us know through the comments section. We may help you out.

via-xda

sm-n9005 Firmware –
Hi guys, someone requesting us to Samsung Galaxy Note 3 SM-N9005 Stock Firmware files. Update your Samsung Galaxy Note 3 to the latest firmware released by Samsung. So whenever there’s a new Android version available Samsung updates its phones with the latest firmware.

Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 7 0

But some case happens in your Note 3 SM-N9005 device or So maybe you have a custom ROM installed, maybe just one on the root your device for any reason.

If you want to go back to the way your phone was when you took it out of the box. Wind 10 64 bit iso download. Therefore you want Original firmware, now find the bellow table for download Note 3 sm-n9005 firmware.

Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 Battery Won T Charge

Download Firmware for Galaxy Note 3 SM-N9005 –
Android 5.0 Lollipop

Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 3 Lite

Galaxy Note 3 SM-N9005 review

Download Android 5.0 Lollipop Rom For Samsung Galaxy Tab 320

Galaxy note 3 phone Released 2013. This model SM-N9005 had to Android OS v4.3 Jelly Bean with TouchWiz UI. Etech usb wlan driver. now mobile can update android 5 using this note 3 firmware downloading and installing. Note 3 model N9005 has one of the key specifications Quad-core 2.26 GHz Krait 400 CPU, Adreno 330 GPU, Qualcomm Snapdragon 800 chipset. Also has 3GB of RAM and 13 MP autofocus camera with LED flash. The built-in storage available 32GB/64GB and Ample 3,200mAh battery with great endurance.